Read instructions before using the ERC Suppressor!
Always ensure you are using the correct caliber.
ERC Suppressor matching your rifle’s caliber.
Always wear eye and ear protection when using the ERC Suppressor.
There is a burning risk when using the ERC Suppressor.
Always use glove protection when using the ERC Suppressor.
Ensure that the barrel thread the barrel thread is lightly oiled before attaching the ERC Suppressor.
After every +- 5 shots, ensure that the ERC Suppressor is securely tightened by hand using gloves.
DO NOT OVER TIGHTEN! After a shooting session remove the ERC Suppressor from your rifle or unscrew the suppressor at least +- 2 turns anticlockwise.
ALWAYS remove the ERC Suppressor from your rifle before storing it for prolonged periods of time.
DO NOT obstruct the exit hole of the ERC Suppressor while fitted to a rifle.
DO NOT under any circumstances disassemble the ERC Suppressor.
Gunsmith Information
Beware of cutting the thread on the barrel to a tight tolerance. The threads may seize when attaching the ERC Suppressor.
BY LAW, ONLY A REGISTERED GUNSMITH MAY CUT THE BARREL THREAD ON YOUR RIFLE TO FIT AN ERC SUPPRESSOR!